§ 14-12-54. Miniature boilers—New installations.

A.

No miniature boiler, except reinstalled boilers and those exempted by these rules and regulations, shall hereafter be installed in this city unless it has been constructed, inspected and stamped in conformity with section 5 of the A.S.M.E. Boiler Construction Code and is approved, registered and inspected in accordance with these rules and regulations.

B.

A miniature boiler having the standard stamping of a state that has adopted a standard of construction equivalent to the standard of construction of this state may be accepted by the chief inspector; provided however, that the person desiring to install the same shall make application for the manufacturer's data report covering the construction of the boiler in question.

C.

All new installations of miniature boilers, including reinstalled boilers must be installed in accordance with the requirements of the latest revision of the A.S.M.E. Boiler Construction Code and these rules and regulations.

D.

Upon completion of the installation, all miniature boilers shall be inspected by the chief inspector, a deputy inspector or a special inspector. At the time of this inspection, all miniature boilers must be stamped with the serial number of the city, followed by the letters "MFS," such letters and figures to be not less than 5/16 inch in height.

(Code 1967, § 45-84; Code 1985, § 42-89)